Sunday, March 7, 2010

Extractor Installation

Went ahead and install the extractor for Elantra X20. The new come in 4 to 1 flow, which is suppose to help improve output flow, plus a gain a few more additional hp.


Original extractor with the O2 sensor 


engine mount








Sunday, October 25, 2009

T10 led bulbs

I have tested a quite a number of T10 led bulbs in the market, and more often most of them turn out to be  a mere disappointed despite paying a hefty price to purchase these led bulbs via online or accessories shops around. 




Life span of these blubs vary between 1 year to couple of months (the general rule of thumb is the brighter and hotter the bulbs are the shorter their life span), despite that nothing has prepared me for my next encounter which only last a mere 20 mins!




I went and bought a T10 led with 10 led from a "famous" accessories shop along old klang road yesterday. Despite hard negotiations, I only managed to get the pair for bulb for RM70. Despite its shoddy look, i decided to give it a try. The shop's one of many unskilled workers went ahead and installed the T10 led. 










Nightmare begin 5 hrs later, when i found the one of the bulb has actually burnt off, and pieces of it has melted and stuck to the headlight reflector, and I decided to remove the other bulb before that bulb melts away as well, unfortunately the bulb wasn't fixed properly to the socket, so the entire bulb fall into the headlight. Now comes the interesting and grueling part of removing them out. Basically I had to remove the headlight, and take off the main bulb and shake the bulb out. After a good 30 mins both the bulb and pieces of the bulb were removed. But it certainly have left a burn scar on the reflector. 



Conclusion: The bulb which was sold to me, is below sub standard and the workers at accessories shop was certainly unskilled. I certainly wont be returning to that particular shop in this life time or the next. Anyone who wants to replace their T10 bulb, I would strongly advice to source for good quality (Taiwan, japan or even us made). 

Monday, October 19, 2009

Qmax - Nano Air (little wonder plastic)

Granted when you first look at this little piece of plastic, the first thing which rushes to you mind is.. err no way this piece of plastic can do anything it claims to do. It claims to improve your vehicle braking capabilities, it also claims to improve your fuel consumption and makes your engine feel and run much smoother then before. All this is made possible by breaking up the air molecules before it reaches your engine. Fiction? 




Well got myself 1 unit out of curiosity to try out. Installation was as easy. Remove air filter element and clip it to the filter fins, and place it back. Thats it and you are ready to roll. I tried with the other steps mention on their website (http://www.vclassmotorsport.com/template.asp?menuid=47) , is which too:


1. Rev the car engine about 2 - 3mins above 3000 - 3500 rpm  and 
2. To press the brakes for 5 seconds and release it (repeat this process for 4 - 5 times)


Conclusion, I have to agree, this product really works. I didnt feel the difference on the first day, but on the second day, the engine feels really does feel much smoother and lighter. But I have not experienced the improve in braking capabilities nor the fuel saving properties. Will continue to monitor... 




Wednesday, September 9, 2009

Guang Dao E-Sonic Racing

Finally i got myself the long awaited item from my wish list, a proper Voltage Stabilizer. Was initially looking a few options, the Sun Auto Hot Inazma, the Pivot Megan Rizin and the Guang Dao Hi Auto (E-Sonic). Because of the price of both the Hot Inazma and Guang Dao , I was more incline to the Pivot. After waiting a good few month, and was just about ready to get the Pivot, when news about a unit of Guang Dao was on clearance stock sale at KKLAU (one of the audio, accessories shop in town).

Took the opportunity to go over to KKLAU during the weekend, and before you know it got it installed onto the X20.

All fixed and ready to roll

custom bracket in production

folks at KKLAU was kind enough to make a custom bracket to hold the E-Sonic



Initial findings:

- Smoother / Lighter gear engagement
- Faster pick up
- More drag before each gear change
- Certainly more ommph now.. how much more HP increase? dunno, until a proper dyno is done



Saturday, September 5, 2009

Philips Diamond Vision vs Philips X-treme

Here are the results....


Another shot of the headlights with Diamond Vision and X-terme

the diamond vision bulb
Conclusion :-

The Diamond Vision gives you a pretty intense white light, but not white or bright enough to blind on coming traffic. I personally find that the X-terme has more light throw compared to the Diamond Vision (meaning from the drivers point of the view, there is just more yellow light on the road compared to the white light). Where the Diamond vision lacks in terms of light throw it makes up for by giving you that white glow which make it look like a HID bulb on the road.

Like some of the review said, its pretty good for city driving as less throw light is required compared to negotiating sharp corners or tricky off road conditions on pitch dark situations.





Wednesday, September 2, 2009

Oh! H7 bulbs!

Here is how the story goes...

I changed the X20's headlight bulb from the stock bulb to the Philips X-treme Power which promises +80% more light due to the 25m long beam it produces. Been happy with the bulbs output & range over the last 1 year. Other bulbs which other X20's owners were using withing the Philip bulb family, were the Philip Crystal Vision which produces 4300k light (yellowish white) and the Philips Diamond Vision which produces about 5000k light (blueish white). Granted the Philip X-treme doesn't come as bright as the other bulbs, but it certainly was brighter then the stock bulb.

X-treme which give you 80% more light

Which give you 5000k light claimed to be whiter then some HID bulbs


All was fine and good, until a week back one of the bulbs decided to fail on me. Was running One headlight that night, luckily the fog light were there to compensate. So it was back to the drawing board. It was a tough fight between Crystal Vision and Diamond Vision, both would suit me just fine, but in the end since the X20 was mainly used for city driving I decided to go with the Diamond Vision instead. This was also done, after going through a few user reviews on the net, and recommendation on the Philips consumer website which quotes the light which is suitable for city driving.

Received the Diamond Vision bulbs today, but will wait till the weekend before that part of the experiment begins. Is it truly whiter and brighter then the X-treme?

Will keep you guys updated...